Van-Isle Technology Systems Ltd.

 

 Job Information Dialog Box

 

The Job Information Dialog box is used to set the header information in the output file and sets the global variables for the job.

 

  • Job Number
  • Job Name
  • Person's Name who made the file
  • EPack Folder
  • Mitsubishi Machine Type
  • Decimal Precision
  • Metric or Imperial
  • Auto Wire Feed ON/OFF
  • Submerged or Non-Submerged
  • Z-Axis control ON/OFF
  • Set Default Approach For All Objects (see below)
  • 4-Axis Output Absolute or Incremental
  • Select EPack by
       
     -
    Material Type
        -
    Wire Size
        -
    Material Thickness
  • View Current EPack Table (see below)
  • Slot used with CX and SX machines only (see below)
  • Set Defaults for Z1,Z2,Z5
  • Set Start Point at X/Y or First Object
  • Set Default Speed Between Objects or G00
  • Add comments to the Operator in the file header

________________________________________________________________________________________________

The Job Information Wire-Approach dialog box assigns the default Approach settings for all objects. Each Objest can be changed in the Object dialog box.

  • The % of Approach sets the distance the Startup Epack is used along the first cut of the part.
  • Ramp ON sets the code to Ramp On/OFF the part for a smooth entree and exit point.
  • Nib Radius is the radius of the arc entering and exiting the part. Defaults is 0.003 inch larger than the wire size.


 

Example of Ramp ON/OFF in AutoCAD

_____________________________________________________________________________________

Information shown is derived from the View Settings button in the Job Info dialog box above.
Information in the white boxes can be edited and stored with this job.

_________________________________________________________________________

 

The Slot function in the dialog box above is used with the CX and SX machines only.
It allows the operator to use different material Epacks without reloading the Epacks in the machine. This only applies to the CX and SX machines.


Example:

If the machine, is loaded with Steel Epacks, needs to run a Carbide job, separate loading of the Carbide Epacks is no longer necessary. With this function, one of ten predefined slots in the user-defined Epack space in the machine will load the Carbide Epacks that you needed for this job. Choose slot 0 for the Epacks will be stored them in Epack location 100 - 109.
Slot #
Epack Locations
0
100 - 109
1
110 - 119
2
120 - 129
3
130 - 139
4
140 - 149
5
150 - 159
6
160 - 169
7
170 - 179
8
180 - 189
9
190 - 199

Note:

When using this method the operator must make sure to reload the file from disk next time he runs the job. The Epacks may have been over written by other jobs. Epacks are not stored with the file on the machine only on the disk.

 

Code Example:
Rectangle with Rough & 4 skims

%
L107/Drawing1
(Date:20031123.145932)
(FileName:C:\Documents and Settings\Administrator.TESSA\My Documents\Out24.nc)
(AutoCadFileName:Drawing1.dwg)
(ProgrammerName:Administrator)
(MachineType:CX-S Series)
(EDMwire v3.03.11.00)

(Imperial_Units)
G70
(WireSize = 0.010 'W4')
(MaterialType = D2 Tool Steel 'M1')
(MaterialThickness = 1.000 'T4')

(Machine_Start_Location)
G90
G92
X4.62269 Y5.08121
M91

(Pass#_1)

(Square)
Z1=1.0000 Z2=0.0000 Z5=0.0000
M101
H93=11 M96
E101 H3=0.2205 H1=0.0090
G22H110
M101 H93=11 M97
E102 H3=0.1181 H1=0.0059
G22H110
E103 H3=0.1102 H1=0.0055
G22H110
E104 H3=0.1181 H1=0.0053
G22H110
E105 H3=0.1496 H1=0.0052
G22H110
M21
M91 G40
M02

(Start_Sequence)
N05
M20
N06
M78
M78
M80 M82 M84
M90

G90 FH3
G01
G23

(Square)
N110
G01 X4.62269 Y5.08121
G22H05
G42 X4.62269 Y5.69118
X5.98130 Y5.69118
X5.98130 Y4.09143
X3.19499 Y4.09143
X3.19499 Y5.69118
X4.62269 Y5.69118
X4.62269 Y5.08121 G40
G23


(Erase_and_Load_Epack_Slot_0)
E100/W
E101/W
E102/W
E103/W
E104/W
E105/W
E106/W
E107/W
E108/W
E109/W
E100/W4M1T4C30H680F5S50/7000/8000/8107/8201/8303/8412/8512/8610
8714/8802/8900/9001/9101/9221/9303
E101/W4M1T4C2H680F22S220B700D500G900/7000/8012/8111/8201/8304/8408/8512/8610
8714/8802/8900/9001/9101/9221/9303
E102/W4M1T4C42H540F12S240B50D50G50/7000/8005/8104/8201/8302/8414/8512/8613
8714/8801/8900/9001/9101/9211/9301
E103/W4M1T4C43H530F11S250/7000/8006/8103/8201/8302/8414/8512/8614
8714/8801/8900/9001/9101/9211/9301
E104/W4M1T4C44H520F12S210/7000/8008/8102/8210/8302/8403/8512/8614
8714/8801/8900/9001/9101/9211/9301
E105/W4M1T4C45H520F15S260/7000/8005/8101/8206/8302/8404/8512/8614
8714/8801/8900/9001/9101/9211/9301
E106/W4M1T4C1H680F23S230/7000/8000/8112/8201/8305/8410/8512/8610
8714/8802/8900/9001/9100/9221/9303
E107/W4M1T4C3H690F14S130/7000/8000/8111/8201/8303/8410/8512/8610
8714/8802/8900/9001/9100/9221/9303
E108/W4M1T4C10H690F9S80/7000/8000/8110/8201/8303/8414/8512/8609
8714/8802/8900/9001/9101/9221/9303
E109/W4M1T4C20H690F7S60/7000/8000/8109/8201/8303/8412/8512/8610
8714/8802/8900/9001/9101/9221/9303

 

--------------------------------------------------------------------------------

Home | Download | EDMwire Features | ToolBar | Tutorials | Program History | Bug Reporting | Contact Us
Dialog Boxes: Job Info | Object Info | Vertex Info | Render | Output Editor

© Copyright 2007 Van-Isle Technology Systems, Ltd.